OMEGA 100

Conveyor belt machines

OMEGA 100: at the heart of a perfect edge.

Designed and manufactured according to the up-to-date concepts and structural principles, the OMEGA series, automatic multispindle belt polishing machine, is remarkable for its performance and production on every kind of marble and granite. Its complete equipment allows it to perform all the finishing operations on the materials used in the building field, furnishings and monuments. On steps, window sills and other works with thickness from 20 to 60 mm (Omega 60) and from 20 to 100 mm (Omega 100) this machine is able to perform: calibration/gauging, straight edge, bevels, upper groove, lower groove, sloping cuts and their polishing, quirk miters (QM), slot cuts in general, bullnose, edges with regular round shapes (quarter bullnose, half bullnose, etc...), and it is able to create but not to polish some irregular profiles such as ogee profiles.

The exclusive features of a Comandulli machine: Omega 100

Steel structure, electrowelded, fully worked by a milling machine.
Main covers in stainless steel.
Possibility of polishing the edges without the contrast bar, due to the special sliding system of the conveyor belt (a set of idle rollers is under the belt, guiding it in its proper grooves. In this way, the sliding friction becomes rolling friction) and the slab locking - by pneumatic pistons.
Oscillating operation of the edge polishing group by a lever system, original, patented, operated by hydraulic pistons electronically controlled. Oscillating mechanism, placed in its proper boxes, oil bath.
Hydraulic working of the motors for the edge polishing.
Each spindle is independent.
Possibility of polishing straight edges on slabs of different thickness, one after the other.
Water collection tank equipped with two lateral outlets.

Equipment

HERE WE SHOW YOU OUR CONCEPT OF COMPLETENESS.

- Calibrator/gauging.
- Bevelling spindles (pre-cut).
- Series of spindles for the edge (the first with diamond wheel generating the bullnose profile).
- Series of bevelling spindles.
- Spindle for lower / upper groove.
- Extendible bar to support pieces of big dimensions.
- Rollers for material loading/unloading

Options

THERE IS ALWAYS ROOM FOR MORE OPTIONS.

- Motorized positioning of calibrator, lower / upper groove units.
- Automatic bevelling spindles.
- Automatic lock for diamond tool generating spindle.
- Vertical spindle for calibrated strip polishing.
- V ertical spindle for bushhammering of the slab surface.
- Opposite upper groove spindle (double upper groove).
- Centralized automatic lubrication system.
- Bevelling spindles with the possibility of horizontal positioning in addition to the straight edge polishing.

01 Flat edge	02 Bevelling	03 Calibrated	04 Partial jobs on straight edges
05 Partial jobs on full bullnose edges	06 Bullnose	07 Quarter bullnose	08 Quarter bullnose and bevels
09 Half bullnose	10 Half bullnose with bevel	11 Pencil round top and bottom	12 Shark nose
13 Large bevel and straight edge	14 Rebate	15 Top cut	16 Under cut
17 Slotting